12.3" Electronic Rearview Mirror Monitoring System

This electronic rearview mirror is specially designed for the large vehicle such like bus. It is used as a substitute for the original physical rearview mirror. It combines advanced electronic camera technology and display technology to provide the driver with a side rear view of the bus. It overcomes the influence of traditional rearview mirrors by rain, fog, light and other adverse conditions, and can greatly improve driving safety. Due to the small size of the electronic camera, it can reduce the wind resistance by 2% ~ 4%, reduce the fuel consumption by 0.5 ~ 1%, and achieve the purpose of energy saving. At the same time, the traditional exterior rearview mirror is canceled, which reduces the length of the bus by 800mm. Greatly reduce the turning radius of the bus and improve driving flexibility. At the same time, the system can be extended to customize the rear view image, active anti-collision ultrasonic radar, recorder, BSD and other functions.
The electronic rearview mirror blind spot monitoring system can instantly display the dynamic blind spot monitoring image of the vehicle, overcoming the blind spots on the left and right sides and the front of the traditional optical rearview mirror. It has a clearer image than traditional optical rearview mirrors. It has wide dynamic, strong light suppression (visible at the junction of light and dark), ultra-low illumination and tempered water slide glass on the surface (visible at night and rainy days), and intelligent heating function (to solve the problem of frost formation in cold areas). It provides a good vision for the driver and reduces the safe driving accidents caused by blind spots in the vision. It is a good helper for the driver.

Why Electronic Rearview Mirror Monitoring System?

On average, about 200,000 traffic accidents occur in China each year, and more than 50,000 people die in traffic accidents each year, ranking among the top 10 in the world. Among them, the probability of being disabled and killed by big trucks is high, mainly because the blind area of big trucks is too large, but few pedestrians and drivers know where the blind area of big trucks is.

The electronic rearview mirror effectively solves the safety hazards of trucks during driving, reduces visual blind spots and misjudgment in rainy days, maintains brightness, and can cope with various complex environments.

Following pictures are showing the bind area of a large vehicle.

Zone A. B and C: Semi blind zone

The danger range depends on the size of the truck, and when the truck is quite high, a blind spot will appear below the vehicle body. So no matter what car you drive, don't try to approach the front of a big truck.

Zone D: Full blind spot

This zone is located outside both the driver’s direct line of sight and the view range of the 3 rearview mirrors.

Zone E: Full blind spot

The line of sight is blocked by the A-pillars on the left and right sides of the windshield, forming a blind spot.

Product Features
• 12.3" display screen, support 1080P / 720P signal input.
• Left and right 2 display screen to solve the driver's blind area, support the installation of 4~6 cameras.
• Each LCD screen is displayed in two areas (1/3 area and 2/3 area).
• When it is lower than 20KM, it can be switched to the front blind area screen (taken from CAN data speed, automatic conversion).
• The displayed video screen supports arbitrary cropping.
• The viewing angle is larger than that of the original rearview mirror, reducing blind spots.
• The camera with ultra-low illumination CMOS imported high-end chip IMX307/225, the night effect is more prominent.
• The natural anti-glare effect does not affect the driver's driving.
• The product is compact and exclusive private model; replace the original rearview mirror to reduce the wind resistance of the body.
• Optional: Support ultrasonic radar, recorder and other functions, rich interface.
• Customization: When a horizontal screen is installed, a three-area video screen is displayed.

 

Car DVR and Display 2 in 1

The combination of side cameras and high-definition electronic rearview mirror displays can avoid blind spots on the vehicle body and ensure driving safety. Equipped with recording and playback functions, it is convenient for analyzing abnormal vehicle conditions.

12.3 " Highlight IPS Screen

12.3 inch HD IPS screen, high contrast, brightness. Restore the true color, showing a more high-definition, bright, delicate picture

Instant 1080P HD Blind Spot Monitoring

supports 2-way 1080P camera input, and the two-split screen is displayed on the same screen. The driver can control the surrounding conditions of the vehicle more accurately. At the same time, the camera can provide the driver with a wider viewing angle, which greatly compensates for the large blind area of the traditional rearview mirror. 

Strong Light Inhibition

The irregular lighting behavior of the rear vehicle may cause strong reflection in the traditional rearview mirror, and the rearview screen cannot be seen clearly. The electronic rearview mirror does not rely on mirror imaging, and relies on the camera signal input to process the strong light source, which perfectly solves the problem of strong light dazzle. And the camera has a WDR function, even in the light and dark light contrast is too large, can also have a clear view.

Technical Paramters

Equipped with Nnight vision Camera

The night view is clearly visible

Solve the problem of poor visibility of traditional rearview mirrors at night

Fearless of rain, snow and fog

Fearless of adverse weather such as rain, snow, fog, etc

The electronic rearview mirror is placed inside the car, and after rain, snow, or fog, it will not condense like traditional rearview mirrors, greatly affecting the rearview effect