Why choose Worldline 360 for your car？
All vehicles have blind spots - areas close to the vehicle that the driver cannot see because their line of sight is obstructed by the vehicle body or attached equipment. When manoeuvring, these blind spots can pose a significant hazard to anyone or objects on the vehicle's path, making it difficult for the driver to control the car safely.
Blind spots can be avoided by using rearview mirrors and independent cameras, but even with these additional devices, the driver may still not able to see all obstacles in the vehicle's path. After all, he has to pay attention to traffic, and can only look at one mirror or screen at a time.
The Worldline 360° panoramic driving assistance system simultaneously collects images around the vehicle through four 180° ultra-wide-angle fish-eye cameras which installed on the vehicle's front, rear, left, and right sides. With real-time transmission to the central control display, the driver can directly check the surrounding conditions of the vehicle through the display, stay away from obstacles in the blind spot, and travel easily and safely.
Worldline 360 system provides drivers with real-time and comprehensive vehicle views through a single image.
The system consists of four ultra wide angle cameras, each capturing the entire side of the vehicle from a 180 ° angle of view. The calibrated camera is installed at the front, side, and rear of the vehicle or construction machinery, recording the entire area, including all blind spots.
Four real-time images are simultaneously sent to the electronic control unit, which immediately processes them and splices them together and fuses them together. It also eliminates the distortion caused by the fish-eye lens of the camera, so that the driver's display can show clear and smooth real-time images.
Installation
Both installation and calibration of each Worldline 360 system are with its own unique characteristics.
The combination and merger of camera images can be particularly adapted to the need of driver. After the combination and merger of camera images are set, the settings can be saved and used on other identical vehicles in the fleet.
Worldline 360 is applicable to almost any type of individual vehicle or construction equipment, regardless of size. The system can adjust the distance of the detection area according to operating conditions. Due to the flexibility of the system, it is suitable for both road and off-road vehicles.
The Value of Installing Worldline 360 AVM
● Side parking
The car is getting bigger and bigger while the parking space is getting smaller and smaller. The maximum distance detected by radar is 40cm, while the maximum distance for a 360 panoramic view is less than 5cm. At the same time, 360 AVM can accurately display the position status of the vehicle body, helping driver easily adjust direction and perfectly complete side parking.
● Reverse parking
After installing the 360 AVM, the driver can see the surrounding scenery inside the car, no longer having to look left or right, exploring front and looking back, and can gracefully complete the reverse and entry actions. Whether novice or experienced, reverse and entry becomes so simple and easy.
● Turn blind spot
Any obstacles within the left and right blind spots of the vehicle body can be shown on the central control screen, and a 360 AVM can effectively solve problems such as tire scratches and accidents in the left and right blind spots during turning.
● Low obstacles
When the vehicle is not equipped with front and rear view cameras, obstacles within the blind spot 0.5 meters in front of the vehicle cannot be detected
● View on steep slopes
When driving on a steep slope of 30 degrees, the driver can only see the sky ahead and cannot see the road conditions ahead. After installing the 360AVM, the driver can see everything in front of the car through the screen.
● Narrow road conditions
Using 360 AVM can easily solve the problems of narrow roads, narrow bridges, holes or obstacles on the roads, and etc.
